Ural electrical gremlins came back again

Here is where the best of "how to" posts and instructional videos will be posted. No more sticky posts clogging up the General Hammerin' & Wrenchin' section
Forum rules
This is the place for the best of & "How to" posts, please post your stuff in the General Hammerin' & Wrenchin' section and the admins or moderators will move them to this section if they are worthy.
Post Reply
John B
Hero of the Soviet Union - 2018
Hero of the Soviet Union - 2018
Posts: 49
Joined: Sun Jun 09, 2013 5:47 pm

Ural electrical gremlins came back again

Post by John B » Sat Jun 17, 2017 7:33 pm

Well The Ural electrical gremlins came back again. Got stuck on the side of the road for awhile but after pulling on some wires under the head light got her going so I was able to get home :boogie:
After looking at the wiring rats nest I found the problem this time I hope for sure. The main feed wire to the fuse box was making partial contact. The wire insulation was under the wire hold down. See attached pictures. I also replaced the ignition switch because I had problems with it in the past. I hope this will cure my electrical problems for now :D
image.jpeg
image.jpeg
You do not have the required permissions to view the files attached to this post.

gobium
Order of Victory
Order of Victory
Posts: 15044
Joined: Wed Sep 07, 2011 2:06 pm

Re: Ural electrical gremlins came back again

Post by gobium » Sat Jun 17, 2017 7:39 pm

That first fuse send juice to starter button

John B
Hero of the Soviet Union - 2018
Hero of the Soviet Union - 2018
Posts: 49
Joined: Sun Jun 09, 2013 5:47 pm

Re: Ural electrical gremlins came back again

Post by John B » Mon Jun 19, 2017 10:37 am

Thanks Van good to know why something doesn't work

Post Reply