25mm brake and clutch levers

Newbies, introduce yourself here. Are you thinking about getting one and have questions? Ask your basic questions here. Please post any tech questions in "The Order of The Greasy Wrench" section.
Forum rules
Here's the place for those who are newb or thinking about buying a Ural or Dnepr to introduce themselves ask those typical "newbie" questions. Try using the "Search" link at the top of the page to see if your question may have been asked before. Please post any tech questions in "The Order of the Greasy Wrench" section.
Post Reply
Redtrev
New Member
New Member
Posts: 9
Joined: Wed Nov 13, 2019 12:42 pm
Location: Northampton, UK

25mm brake and clutch levers

Post by Redtrev » Thu Nov 14, 2019 4:48 am

Hello there and thanks for letting me on here.
I've just bought a Dnepr K750M and I need new brake and clutch levers. I've been searching and I'm struggling to find alloy lever assemblies that fit 25mm bars. I'm not too keen on getting the cheap Chinese stuff.
Any ideas?
Cheers.
Trevor

User avatar
Lmo
Hero of the Soviet Union - 2019
Hero of the Soviet Union - 2019
Posts: 5080
Joined: Wed Jun 10, 2015 3:19 pm
Location: Pismo Beach via So. Indiana

Re: 25mm brake and clutch levers

Post by Lmo » Thu Nov 14, 2019 5:05 am

Might try "Russian Garage".

https://russiangarage.com/index.php?cPa ... teiebn1kn4

Oh, and welcome aboard Trevor. Add your location to your 'signature' line, you never know when help is just around the corner.
Lew Morris
Dnepr w/ '06 Ural Drive Train
C5 Power Arc
125/42 jets
Drilled slides/
.030" shims

1973 BMW R75/5 (original owner)
1947 HD FL (long gone, forever regretful)

User avatar
sallen
Hero of the Soviet Union - 2019
Hero of the Soviet Union - 2019
Posts: 722
Joined: Sun Apr 15, 2012 12:52 am
Location: Wilmington NC

Re: 25mm brake and clutch levers

Post by sallen » Thu Nov 14, 2019 8:09 pm

Also check out Old Timers Garage
I've got a Dnepr, he has quality parts
19?? Dnepr MT16

2008 Gear Up / Orange camo
130/45 one shim
drilled slides

2008 Gear Up / Orange camo

A statement I live by.
Panic is a luxury you can afford after it is all over.

User avatar
Snakeoil
Order of Suvarov
Order of Suvarov
Posts: 4429
Joined: Sat Nov 29, 2014 9:45 pm
Location: Upstate NY

Re: 25mm brake and clutch levers

Post by Snakeoil » Thu Nov 14, 2019 10:01 pm

Buy some 1 inch perches and shim them if all else fails. Less than .020" difference. Beer can shim should do the trick.
Regards,
Rob
Proud member of the Peanut Gallery
2000 Ural Tourist
40 Pilots, 122 Mains
Before you say something stupid, always ask yourself, "What would Harpo say?".

User avatar
Eric N
Order of Lenin
Order of Lenin
Posts: 1108
Joined: Sun Jul 24, 2016 3:26 pm
Location: Westminster, Colorado

Re: 25mm brake and clutch levers

Post by Eric N » Thu Nov 14, 2019 10:22 pm

https://www.ural-zentrale.de/en/chassis ... er-bracket

https://www.ural-zentrale.de/en/chassis ... er-bracket

https://www.ural-zentrale.de/en/chassis ... steel-pair

2001 and older Urals will also be 25mm. The Russian Garage levers are crap, I tried them when I broke a perch and ended up getting what I needed from Terry Crawford. http://www.crawfordsales.info/
2018 Gear Up
2013 Retro Solo
2001 Patrol - Sold

Redtrev
New Member
New Member
Posts: 9
Joined: Wed Nov 13, 2019 12:42 pm
Location: Northampton, UK

Re: 25mm brake and clutch levers

Post by Redtrev » Sun Nov 17, 2019 6:56 am

Many thanks

User avatar
Lmo
Hero of the Soviet Union - 2019
Hero of the Soviet Union - 2019
Posts: 5080
Joined: Wed Jun 10, 2015 3:19 pm
Location: Pismo Beach via So. Indiana

Re: 25mm brake and clutch levers

Post by Lmo » Sun Nov 17, 2019 1:26 pm

Personally, I don't believe you have a Dnepr K750. You'd have to post photos of it to convince me... :wink: :P
Lew Morris
Dnepr w/ '06 Ural Drive Train
C5 Power Arc
125/42 jets
Drilled slides/
.030" shims

1973 BMW R75/5 (original owner)
1947 HD FL (long gone, forever regretful)

Post Reply